- Bearing company
- NTN Bearing KOYO Bearing FAG Bearing
Home>Products>ISO Bearing>iso 492 bearing
English
iso 492 bearing
Online shopping iso 492 bearing from a 7149 kN Basic dynamic load rating C great Bearing company selection at Store. 2.3 Calculation factor Y1 ... 49.8 mm b ISO Bearing Accessories.
- iso
492
- 2.3
- 49.8 mm
- 7149 kN
- 2.2
- 3.4
- 5 mm
- 757 mm
- 6 mm
-
Bearing company2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
iso 492 bearingDimensions
| Calculation factor Y1: | 2.3 | b: | 49.8 mm | Basic dynamic load rating C: | 7149 kN |
| Calculation factor Y0: | 2.2 | Calculation factor Y2: | 3.4 | ra max.: | 5 mm |
| Da max.: | 757 mm | r1,2 min.: | 6 mm | K: | 15 mm |
| da min.: | 553 mm |
iso 492 bearingProduct Identifiers
| Classification | Organic Fertilizer | Type | Humic Acid | CAS No. | 68514-28-3 |
| Other Names | Humic Acid Organic Fertilizer | MF | C9H8K2O4 | EINECS No. | 215-809-6 |
| Place of Origin | Shandong, China | Release Type | Quick | Purity | 100% |
| Application | Foliar Fertilizer |
| Oil Speed Rating Open/Shielded n2 | 3000 rpm |
| Accessories | Two Shields |
| Basic Dynamic Radial Load Rating C | 93600 N |
| Fillet Radius ra | 2.00 mm |
| Sealed Speed Rating n3 | 1600 rpm |
| B | 28.00 mm |
| Basic Static Radial Load Rating Co | 104000 N |
| D | 230.0000 mm |
| Grease Speed Rating Open/Shielded n1 | 2400 rpm |
| d | 170.000 mm |
iso 492 bearing Select
| iso 492 bearing Interchange Guide | ||||||||
| b | B | G | d | D | a | K | α | |
| 281 | - | 38.10 mm | - | 65.000 mm | 120.0000 mm | - | - | - |
| 492 | 49.8 mm | - | - | - | - | - | 15 mm | - |
| 15243 | - | - | - | 8 mm | 14 mm | - | - | - |
| 12240 | - | - | - | - | - | 23 mm | - | - |
| 16281 | - | 17.00 mm | - | 25.000 mm | 62.0000 mm | - | - | - |
| 5753 | - | 20 mm | M 95x2 | 95 mm | - | - | - | - |
| 15 | - | 16 mm | - | 28 mm | 40 mm | - | - | 124 ° |
| din 281 | - | 28.00 mm | - | 170.000 mm | 230.0000 mm | - | - | - |
| din 12240 | - | 7.00 mm | - | 15.000 mm | 28.0000 mm | - | - | - |
ISO 492:2014 - Rolling bearings -- Radial bearings ... - ISO
ISO 492:2014 specifies dimensional and geometrical characteristics, limit deviations from nominal values, and tolerance values to define the interface (except
ISO 492:2014(en), Rolling bearings — Radial bearings
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the
ISO 492:2002(en), Rolling bearings — Radial bearings
Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rights. ISO shall not be held responsible
ISO 492 - SiS
STANDARD. ISO. 492. Fourth edition. 2002-04-15. Rolling bearings — Radial bearings —. Tolerances. Roulements — Roulements radiaux — Tolérances
ISO 492:2002 - Rolling bearings — Radial bearings ... - ISO
ISO 492 specifies tolerances for boundary dimensions (except chamfer dimensions) and the running accuracy of radial rolling bearings specified in ISO 15, ISO
Bearing Tolerances and Precision Levels | AST Bearings
In almost all cases, these standards are similar to or state equivalency with ISO 492. The table below shows the equivalent tolerance grades for three of the most
Bearing Tolerances - NTN Global
running accuracy, are regulated by ISO and JIS B 1514 standards .... Notes 1: JIS B 1514, ISO 492 and 199, and DIN 620 have the same specification level
Tolerances
Tolerance classes and the corresponding values for certain tolerance characteristics are specified in ISO 492 (for radial bearings) and ISO 199 (for thrust
Contact Us
- Bearing company
- AddressViamonte 1145-Piso 11-1053 Buenos Aires, Argentina
- Phone(Working Time)372-6235
- Fax
Related News
| fag bearing supplier size catalogue |
| skf tmft cad model |
| skf yar price list |
iso din 12240 bearing
iso din 281 bearing
iso 15 bearing
iso 5753 bearing
iso 16281 bearing